FRIBEE EDU, Arduino Compatible, Built-in Xbee Shield, 4 Servo Port Support

Make your own "Arduino Robot"!
Create a robot that is equivalent to a widely known "Parallax Robot Shield with
Arduino" product. Our FRIBEE EDU board provides effective functionality
combining "Arduino UNO compitable microcontroller" and "Parallax
board-of-education Shield" and "Xbee shield" functions.
So FRIBEE EDU board performs the same performance as "Parallax Robot Shield for
Arduino".
Preferably it performs more easily and conveniently in terms of Xbee wireless
application of Robot.

Drive your Robot for convenient breadboard prototyping and servo ports,
with no soldering required.
Also remotely control the Robot by adding XBee pin type antenna.
(XBEE / ZIGBEE / Bluetooth / WiFi antenna)
The FRIBEE EDU board has been successfully utilized as the Arduino neo-RobotCar
v2 model's main board in Korean educational sites for more than five years.

Features
17 row x 2 column breadboard for convenient circuit-building
Headers for power (Vin, 5 V, 3.3 V) Ground, Digital I/O and Analog In are
   brought adjacent to the breadboard
Onboard 5 V regulator supplies up to 1 A
Onboard 3.3 V regulator supplies up to 200 mA
4 servo ports with power selection jumper for regulated 5 V or Vin
3-position power switch for power header only or power header + servo ports
Board reset button
Supply indicator LEDs for breadboard and servo power
Tx/Rx Dip switch to select USB serial and XBEE serial communication

Specifications
ㆍMicrocontroller ATmega328P
ㆍOperating Voltage 5V
ㆍInput Voltage (recommended) 7-12V
ㆍInput Voltage (limits) 6-20V
ㆍDigital I/O Pins 14 (of which 6 provide PWM output)
ㆍAnalog Input Pins 6
ㆍDC Current per I/O Pin 40 mA
ㆍDC Current for 3.3V Pin 50 mA
ㆍFlash Memory 32 KB of which 0.5 KB used by bootloader
ㆍSRAM 2 KB
ㆍEEPROM 1KB
ㆍClock Speed 16 MHz
ㆍXBee Socket (802.15.4) & pin header
ㆍDIP s/w for the selection between USB serial and XBEE serial communication.